Author Index

A

  • Abdolkhani, Ali The potential of replacing the starch with soda and formacell lignins in surface sizing and evaluation of physical and mechanical properties of produced liner papers [Volume 12, Issue 4, 2022, Pages 453-464]
  • Abdolkhani, Jaber Evaluation of properties of microcrystalline cellulose produced from bagasse fibers using hydrochloric acid [Volume 12, Issue 3, 2021, Pages 441-452]
  • Abdouss, Majid Poly-capro-lactone/poly-lactic acid/cellulose nano crystal three-component nanocomposites: Manufacturing, mechanical, dynamic-mechanical and morphological investigation [Volume 12, Issue 2, 2021, Pages 217-234]
  • Abdulkhani, Ali Synthesis and characterization of aminated Lignin-based Hydrogel [Volume 12, Issue 4, 2022, Pages 551-560]
  • Afra, Elyas Influence of Cationic Starch and Nano-Wood addition on improving the Old Corrugated Containers (OCC) pulp properties [Volume 12, Issue 4, 2022, Pages 481-493]
  • Akbarpour, Iman The effect of enzymatic pre-treatment with amylase and refining on the physical and dewatering properties of OCC pulp [Volume 12, Issue 4, 2022, Pages 507-519]
  • Alishiri, Mehdi Assessing the effect of air- gap in acoustic panels’ sound absorption made of date palm fiber (Phoenix dactylifera) [Volume 12, Issue 4, 2022, Pages 575-586]
  • Arabi, Mohammad An artificial neural network model for predicting modulus of elasticity and modulus of rupture of particleboard comparison with a multiple linear regression model [Volume 12, Issue 2, 2021, Pages 283-297]
  • Arefi, Majid Investigation of the effect of nano-wollastonite on moisture resistance in sealer-killer and sealer-semi-polyester paints on Fagus orientalis, Abies and Populus spp Salicacea species [Volume 12, Issue 2, 2021, Pages 175-184]
  • Aryaie Monfared, Mohammad Hadi Influence of Cationic Starch and Nano-Wood addition on improving the Old Corrugated Containers (OCC) pulp properties [Volume 12, Issue 4, 2022, Pages 481-493]
  • Asadi, Ali Investigation of the effect of nano-silica deposition on cellulose fibers , the mechanical properties of autoclaved cement composites in industrial scale [Volume 12, Issue 3, 2021, Pages 419-428]
  • Ashouri, Javad The effect of nano-SiO2 particles and film thickness on physical properties of transparent wood coatings [Volume 12, Issue 1, 2021, Pages 1-15]

B

  • Behravavn, Saeed The effect of alkali treatment of wheat straw powder on particle board properties made from mixing wheat straw and industrial wood chips [Volume 12, Issue 1, 2021, Pages 57-71]
  • Behrooz, Rabi Evaluation of structural, physical and chemical properties of cellulose and nanocrystalline cellulose extracted from pruning palm trees wastes [Volume 12, Issue 1, 2021, Pages 95-107]

D

  • Dahmardeh Ghalehno, Mohammad Poly-capro-lactone/poly-lactic acid/cellulose nano crystal three-component nanocomposites: Manufacturing, mechanical, dynamic-mechanical and morphological investigation [Volume 12, Issue 2, 2021, Pages 217-234]
  • Dahmardeh Ghalehno, Mohammad Investigation of biodegradability behavior, thermal properties and morphology of poly caprolactone/ poly lactic acod/ crystal nanocellulose nanocomposites [Volume 12, Issue 3, 2021, Pages 363-374]
  • Dehghani-Firouzabadi, Mohammadreza Study of antibacterial activity and other properties of paper coated by selenium nanoparticles [Volume 12, Issue 1, 2021, Pages 29-44]
  • Djafari Petroudy, Seyed Rahman Effects of maleic anhydride and oxidizer on mechanical and contact angle of polypropylene and cellulose nanocrystals composites. [Volume 12, Issue 2, 2021, Pages 299-307]

E

  • Efhamisisi, Davood The possibility of using zeolite as a retarder of particleboard obtained from sugarcane pulp [Volume 12, Issue 3, 2021, Pages 309-321]
  • Etedali shehni, shokouh Production and evaluation of lightweight fiberboard using ethylene vinyl acetate foam [Volume 12, Issue 3, 2021, Pages 405-417]

F

  • Faezipour, mehdi Quantitative analysis of poplar plantations in four Iranian Provinces (Case of the study: East Azerbaijan, Zanjan, Ardabil and Kermanshah) [Volume 12, Issue 3, 2021, Pages 375-389]
  • Faezipour, Mohammad Mehdi The investigation of surface properties of Populus nigra wood coated with silica nanoparticles [Volume 12, Issue 1, 2021, Pages 133-143]
  • Farahani, Mohammad Reza Investigation of the effect of nano-silica deposition on cellulose fibers , the mechanical properties of autoclaved cement composites in industrial scale [Volume 12, Issue 3, 2021, Pages 419-428]

G

  • Ghahri, Saman Use of Modified Soy Adhesive for Manufacturing Fiberboard from Wood and OCC Fiber [Volume 12, Issue 2, 2021, Pages 247-257]
  • Ghofrani, Mohammad The effect of nano-SiO2 particles and film thickness on physical properties of transparent wood coatings [Volume 12, Issue 1, 2021, Pages 1-15]
  • Gholamiyan, Hadi Identifying the effect of plasma treatment on the palm texture with application attitude in the furniture industry [Volume 12, Issue 1, 2021, Pages 109-120]
  • Gholamiyan, Hadi Evaluation of wood machining parameters and surface quality in cutting process by water jet without abrasive material [Volume 12, Issue 3, 2021, Pages 429-440]
  • Gholamiyan, Hadi Sliding table panel saw, Machining parameters, Sound level meter, Ergonomics, Sound emission [Volume 12, Issue 4, 2022, Pages 465-479]
  • Gholampoor, Behnam Identifying the effect of plasma treatment on the palm texture with application attitude in the furniture industry [Volume 12, Issue 1, 2021, Pages 109-120]
  • Gholizadeh Mehdikhan Mahalleh, amin Evaluation of wood machining parameters and surface quality in cutting process by water jet without abrasive material [Volume 12, Issue 3, 2021, Pages 429-440]

H

  • Hajializadeh, Farajolah Improvement of the bending moment capacity of mitered MDF frame under diagonal tension by using of the densified poplar dowel [Volume 12, Issue 4, 2022, Pages 561-573]
  • Hajihassani, Reza Use of Modified Soy Adhesive for Manufacturing Fiberboard from Wood and OCC Fiber [Volume 12, Issue 2, 2021, Pages 247-257]
  • Hajihassani, Reza Influence of poplar wood densification on surface characteristics and adhesion strength [Volume 12, Issue 4, 2022, Pages 537-550]
  • Hamzeh, Yahya Investigation the effect of Thiophanate-methyl on the ageing of Gall ink of the historical papers ‌ [Volume 12, Issue 2, 2021, Pages 195-205]
  • Hamzeh, Yahya Determination effective criteria in optimizing energy consumption in Kaveh paper industry company using analytic Hierarchy process [Volume 12, Issue 3, 2021, Pages 391-403]
  • Hamzeh, Yahya The potential of replacing the starch with soda and formacell lignins in surface sizing and evaluation of physical and mechanical properties of produced liner papers [Volume 12, Issue 4, 2022, Pages 453-464]
  • Hasanjanzadeh, Hadi The potential of replacing the starch with soda and formacell lignins in surface sizing and evaluation of physical and mechanical properties of produced liner papers [Volume 12, Issue 4, 2022, Pages 453-464]
  • Hedjazi, Sahab The potential of replacing the starch with soda and formacell lignins in surface sizing and evaluation of physical and mechanical properties of produced liner papers [Volume 12, Issue 4, 2022, Pages 453-464]
  • Hedjazi, Sahab Synthesis and characterization of aminated Lignin-based Hydrogel [Volume 12, Issue 4, 2022, Pages 551-560]
  • Hejazi-Mehrizi, majid Evaluation of structural, physical and chemical properties of cellulose and nanocrystalline cellulose extracted from pruning palm trees wastes [Volume 12, Issue 1, 2021, Pages 95-107]
  • Hosseinzadeh, Jaber Evaluation of properties of microcrystalline cellulose produced from bagasse fibers using hydrochloric acid [Volume 12, Issue 3, 2021, Pages 441-452]

J

  • Jamalirad, Loya The effect of alkali treatment of wheat straw powder on particle board properties made from mixing wheat straw and industrial wood chips [Volume 12, Issue 1, 2021, Pages 57-71]
  • Jonoobi, Mehdi Poly-capro-lactone/poly-lactic acid/cellulose nano crystal three-component nanocomposites: Manufacturing, mechanical, dynamic-mechanical and morphological investigation [Volume 12, Issue 2, 2021, Pages 217-234]
  • Jonoobi, Mehdi Effects of maleic anhydride and oxidizer on mechanical and contact angle of polypropylene and cellulose nanocrystals composites. [Volume 12, Issue 2, 2021, Pages 299-307]

K

  • Karimi, Laleh Influence of Cationic Starch and Nano-Wood addition on improving the Old Corrugated Containers (OCC) pulp properties [Volume 12, Issue 4, 2022, Pages 481-493]
  • Khademieslam, Habibollah The investigation of surface properties of Populus nigra wood coated with silica nanoparticles [Volume 12, Issue 1, 2021, Pages 133-143]
  • Khazaeian, Abolghasem Production and evaluation of lightweight fiberboard using ethylene vinyl acetate foam [Volume 12, Issue 3, 2021, Pages 405-417]
  • Khosravani, Amir Cellulose nanofibers made from waste printing and writing papers and its effect on the properties of recycled paper [Volume 12, Issue 2, 2021, Pages 185-194]

M

  • Moradian, Mohammad Hadi Improvement of natural durability of date palm against termites (Microcerotermes diversus) by black liquor of kraft impregnation [Volume 12, Issue 1, 2021, Pages 45-56]
  • Moradian, Mohammad Hadi Determination of sapwood area in Pinus nigra by electrical impedance tomography [Volume 12, Issue 1, 2021, Pages 73-82]
  • Mosavi, Najmeh Recovery of lignin from Kraft black liquor in the methods oxygen and carbon dioxide pretreatment from hardwood Kraft black liquor [Volume 12, Issue 2, 2021, Pages 235-246]

N

  • Najideh, Robab Cellulose nanofibers made from waste printing and writing papers and its effect on the properties of recycled paper [Volume 12, Issue 2, 2021, Pages 185-194]
  • Narimani, Reza Identifying the wood type and investigating the quality of imported wooden ice cream sticks [Volume 12, Issue 4, 2022, Pages 495-506]
  • Nosrati Sheshkal, Babak Poly-capro-lactone/poly-lactic acid/cellulose nano crystal three-component nanocomposites: Manufacturing, mechanical, dynamic-mechanical and morphological investigation [Volume 12, Issue 2, 2021, Pages 217-234]
  • Nosrati Sheshkal, Babak Investigation of biodegradability behavior, thermal properties and morphology of poly caprolactone/ poly lactic acod/ crystal nanocellulose nanocomposites [Volume 12, Issue 3, 2021, Pages 363-374]

O

  • Oladi, Reza Investigation of growth dynamics of Juniper Trees in two Protected and Grazing areas in Jeyshabad, Zanjan, Iran Using Dendrochronology Method [Volume 12, Issue 1, 2021, Pages 83-94]
  • Oladi, Reza Identifying the wood type and investigating the quality of imported wooden ice cream sticks [Volume 12, Issue 4, 2022, Pages 495-506]

P

  • Pirayesh, hamidreza Investigation of the effect of nano-wollastonite on moisture resistance in sealer-killer and sealer-semi-polyester paints on Fagus orientalis, Abies and Populus spp Salicacea species [Volume 12, Issue 2, 2021, Pages 175-184]
  • Poorbaba, Reza An artificial neural network model for predicting modulus of elasticity and modulus of rupture of particleboard comparison with a multiple linear regression model [Volume 12, Issue 2, 2021, Pages 283-297]

R

  • Rahmaninia, Mehdi Cellulose nanofibers made from waste printing and writing papers and its effect on the properties of recycled paper [Volume 12, Issue 2, 2021, Pages 185-194]
  • Ramezani, Soraya The possibility of using zeolite as a retarder of particleboard obtained from sugarcane pulp [Volume 12, Issue 3, 2021, Pages 309-321]
  • Resalati, Hosain effect of cellulase on drainage and strength properties of virgin and recycled pulps [Volume 12, Issue 2, 2021, Pages 207-215]
  • Resalati, Hossein The effect of enzymatic pre-treatment with amylase and refining on the physical and dewatering properties of OCC pulp [Volume 12, Issue 4, 2022, Pages 507-519]
  • Rezaei, Karamatollah Identifying the wood type and investigating the quality of imported wooden ice cream sticks [Volume 12, Issue 4, 2022, Pages 495-506]
  • Rezavni, Mohammad Hadi Identifying the effect of plasma treatment on the palm texture with application attitude in the furniture industry [Volume 12, Issue 1, 2021, Pages 109-120]
  • Rostampour-Haftkhani, Aَkbar Improvement of the bending moment capacity of mitered MDF frame under diagonal tension by using of the densified poplar dowel [Volume 12, Issue 4, 2022, Pages 561-573]

S

  • Salari, Najmeh Evaluation of structural, physical and chemical properties of cellulose and nanocrystalline cellulose extracted from pruning palm trees wastes [Volume 12, Issue 1, 2021, Pages 95-107]
  • Shakeri, Alireza Production and evaluation of lightweight fiberboard using ethylene vinyl acetate foam [Volume 12, Issue 3, 2021, Pages 405-417]

T

  • Taghiyari, Hamidreza Investigation of the effect of nano-wollastonite on moisture resistance in sealer-killer and sealer-semi-polyester paints on Fagus orientalis, Abies and Populus spp Salicacea species [Volume 12, Issue 2, 2021, Pages 175-184]
  • Talaeipoor, Mohammad The investigation of surface properties of Populus nigra wood coated with silica nanoparticles [Volume 12, Issue 1, 2021, Pages 133-143]
  • TALAEIPOUR, MOHAMMAD Assessing the effect of air- gap in acoustic panels’ sound absorption made of date palm fiber (Phoenix dactylifera) [Volume 12, Issue 4, 2022, Pages 575-586]
  • Tarmian, Asghar Identifying the wood type and investigating the quality of imported wooden ice cream sticks [Volume 12, Issue 4, 2022, Pages 495-506]

V

  • Vazirian, Arad Investigation of growth dynamics of Juniper Trees in two Protected and Grazing areas in Jeyshabad, Zanjan, Iran Using Dendrochronology Method [Volume 12, Issue 1, 2021, Pages 83-94]

Y

  • Younesi-Kordkheili, Hamed The Use of Maleated Lignin based Polyacid as Catalyst in Urea-Lignin-Glyoxal Wood Adhesive [Volume 12, Issue 3, 2021, Pages 351-361]
  • Yousefi, Hossein Investigation of the effect of nano-silica deposition on cellulose fibers , the mechanical properties of autoclaved cement composites in industrial scale [Volume 12, Issue 3, 2021, Pages 419-428]

Z

  • Zarea Hosseinabadi, Hamid Comparative investigation of the effect of pretreatment type and densification conditions on physical and mechanical properties of paulownia and poplar woods [Volume 12, Issue 4, 2022, Pages 521-536]